
3
Introduction
Chapter 1
Network Application Platforms
Front Panel Features
F2
F1
F4
F1 Reset Switch
It is a reset switch.
F2 RS-232 COM Port
It is a DB-9 Male Connector. Using suitable RS-232 cable, you can connect an appropriate device, for example, a terminal
console for diagnostics.
Terminal Configuration Parameters: 115200 baud, 8 data bits, no parity, 1 stop bit , no flow control.
F3 USB 2.0 Ports
It connects to any USB devices, for example, a flash drive. Besides this external USB port, there is another one offered
with the onboard pin header connectors (refer to Jumper Setting on Chapter 3 Motherboard Information)
F4 4 10/100/1000 Gigabit Ethernet Ports
The Ethernet switch of 4 Gigabit ports is provided by the Marvell Linkstreet 88E6161 PHY .
LED Indicator LED Function LED Color On O Blinking
Left Link/Activity Green Linked No Link Linking/there is
trac
Right Data Speed Green
Orange
100 Mbps
1000 Mbps
10 Mbps
F5 2 Gigabit Ethernet RJ45 Ports
The Gigabit Ethernet ports are provided by 88E1111 Integrated 10/100/1000 Ultra Gigabit Ethernet Transceiver through
the RGMII interface. They are capable of auto-negotiation and have triple speed (10BASE-T, 100BASE-TX, and 1000BASE-T)
support. Note that only RJ45 or fiber interface of the combo port can work at a time.
LED Indicator LED Function LED Color On O Blinking
Left Link/Activity Green Linked No Link Linking/there is
trac
Right Data Speed Green
Orange
1000 Mbps
100 Mbps
10 Mbps
F6 2 Fiber-optic SFP ports
The 1000BASE-X Ethernet connection are provided by 88E1111 Integrated 10/100/1000 Ultra Gigabit Ethernet Transceiver
through the RGMII interface. Note that only RJ45 or Fiber interface of the combo port can work at a time. And the ports
do not support copper connections.
F7 Link/ACT LED (amber): If the LED is on, the port is linked. If it blinks, it indicates there is traffic.
F3
F5 F6 F7 F8
LAN1 LAN2 LAN3 LAN4
LAN5 LAN6
Kommentare zu diesen Handbüchern