Lanner LVC-5570 Bedienungsanleitung Seite 25

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 48
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 24
25
Board Layout
Chapter 3
Embedded and Industrial Computing
SIM Card Socket (SIM1):
CN3: A power connector with power -ignition Control
DCJK1 (Optional): An optional DC Jack type of Power
Connector
LAN1/LAN2 Ports (LAN1/LAN2): The LAN ports are
provided by Intel 82574L Ethernet controller whose
interface complies with PCI-e 1.1 (2.5 Ghz). It has advanced
management features including IPMI pass-through via
SMBus or NC-SI, WOL, PXE remote boot, ISCSI boot and
VLAN filtering.
Pin No. Description
Fast Ethernet Gigabit Ethernet
1 TX+ BI_DA+
2 TX- BI_DA-
3 RX+ BI_DB+
4 -- BI_DC+
5 -- BI_DC-
6 RX- BI_DB-
7 -- BI_DD+
8 -- BI_DD-
Enable or Disable Daughter Board LEK-IOA6 (COMSLT1):
This jumper is for enabling or disabling COM3/COM4 of
daughter board LEK-IOA6.
Pin No. Pin Name
1 Ignition
2 GND
3 DC_VIN
Pin No. Pin Name
1 DC_VIN
2 GND
3 GND
1 2 3
Enable or Disable Daughter Board LEK-IG1 (COMSLT2):
This jumper is for enabling or disabling COM5/COM6 of
daughter board LEK-IG1. If this jumper is set to disable,
the ISM will not work (refer to Appendix A Using the Ignition
System Manager (ISM)).
Dual USB 2.0 Port Connector #0 and #1 (USB1)
Dual USB 2.0 Port Connector #2 and #3 (USB2)
Dual USB 2.0 Port Connector #4 and #5 (USB3)
Clear CMOS jumper (CMOS1/CMOS2): It is for clearing
the CMOS data. CMOS 1clears CMOS data with real-time
clock (RTC) whereas CMOS2 clears CMOS data only.
To erase the CMOS data:
Turn off the computer and unplug the power cord.
Move the jumper cap from pins 1-2 (default) to pins 1.
2-3. Keep the cap on pins 2-3 for about 5-10 seconds,
then move the cap back to pins 1-2.
Plug the power cord and turn on the computer.2.
Enter BIOS setup to re-enter data.3.
Pin No. Pin Name
1-2 Disable
2-3 Enable
Pin No. Pin Name
1-2 Disable
2-3 Enable
1
2
3
1
2
3
1 2 3 4
5 6 7 8
Pin No. Pin Name
1 VCCUSB
2 USB0N
3 USB0P
4 GND
5 VCCUSB1
6 USB1N
7 USB1P
8 GND
Pin No. Pin Name
1-2 Normal (Default)
2-3 Clear CMOS and RTC (CMOS1)
Clear CMOS only (CMOS2)
1
2
3
Pin No. Description
C1 UIM_PWR
C2 UIM_RST
C3 UIM_CLK
C5 GND
C6 UIM_VPP
C7 UIM_DAT
C5 C7
C1 C3
Seitenansicht 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare